Air Conditioning Tools

The use of appropriate air conditioning tools will substantially improve and accelerate the process of servicing or repairing HVAC equipment. Wrenches, pliers, hammers, screwdrivers, mallets, vises, taps, twist drills, dies, chisels, hacksaws, and files are among the hand tools used by service technicians.

Learn more about these buying hvac tools in Australia so you can ask sensible inquiries of service technicians if necessary.

Types Of Air Conditioning Tools

Hacksaws

Hacksaws are used to cut copper tubing and other metal-cutting projects. Most saws have a variety of blades that can be used depending on the type of metal being cut. The number of teeth per inch varies depending on the type of blade. When cutting thin or hard metal, use blades with more teeth per inch. If you want superior blade quality, go for tungsten or molybdenum steel alloy.

Pliers

Pliers are typical items found in most homes. They are often composed of alloy steel and are capable of cutting wires. Slim nose type is used for reaching nooks or small aperture equipment.

Hammers

Hammers are useful air conditioning tools for fastening or removing nails, as well as delivering the force required to connect two distinct materials. A 16-ounce ball peen hammer may be found in most hardware stores.

Wrenches

Wrenches are used to secure nuts to bolts. HVAC fasteners are typically constructed of copper or brass, making them soft and requiring the use of appropriate wrenches to tighten or loosen them. Wrenches are classified into four types: box, socket, open-end, and adjustable.

Box type is strong and grip nut/bolt tightly.Socket type is tbe easiest to use if space permits it. The Standard 12-Point Sockets are usually made of chromium-vanadium steel and is common household tools that you probably have.Open-end type is able to easily slide on the nut or bolt. Typical sizes for HVAC use are 1″ across flat that fits 1/2″ flare nuts, 15/16″ across flat, 5/8″ across flat, 1/2″ across flat, 7/16″ across flat.Adjustable type is able to use on various sizes of bolt and nuts. The setback is that the grip may not be tight and can cause damage to the bolt/nut.

Screwdrivers

Screwdrivers are typical household tools. The most common varieties are Philips bits, Cabinet bits, and Keystone bits. Allen Recess, Bristol Recess, Philips U Recess, Bristol Bit, and Slotted Screw are among more.

Vises 

Vises are commonly seen in a standard workshop and are used to hold pieces while you work on them. Use a soft jaw made of copper or aluminium to protect the items being worked on.

Twist Drills

Twist Drills are used to install and repair machinery. Different drills are required for drilling in wood, plastic, masonry, and metal. Most are made of alloy steel or carbon steel.

Taps

Taps are used to create threaded holes in metal objects that will be secured using machine screws or tap screws. The tap is composed of a tough alloy steel. Bottoming, plugging, and tapering are the three most prevalent types of taps. Taper is used to begin a cut on metal. The plug type is used to cut the blind holes, whereas the bottom type is used to cut full threads through the blind holes.

Dies 

External threads on circular stock are cut with dies.

Files

Metal files are used to polish and smoothen metal surfaces or pieces. They are available in single or double cut varieties, with lengths ranging from 4″ to 12″.